PVC Gutter

Arensi Marley F370 PVC Gutter FAQ

A list of commonly asked questions and answers for your kind perusal.

1) Will half round shaped gutter overflow easier if compared to rectangular gutter?

No, it won't overflow easier compared to rectangular gutter because a round base gutter will have better water discharge during heavy rain.

2) Is this gutter suitable for all types of building?

Yes, all types of building. As long as there’s enough number of discharge outlet.(Depends on the number of outlet, not gutter size)

3) Will debris get stuck in between internal bracket & gutter?

It is better to prevent debris/remnants between the internal brackets and gutter than letting it enter and clog up the rainwater downpipe.

4) If too many leaves/debris are blocked by the debris trap, will it block the outlet?

It is better to prevent debris at the debris trap rather than it entering and clogging up the rainwater downpipe.

5) How many years warranty?

We provide 7 years warranty.

6) Is uPVC gutter better than GI?

gutter compare

7) Is this gutter available in other colours? Can it be painted?

We have standard white, brown & grey. AM uPVC gutter range can be painted with solvent-base paint to complement your roof outline. Painting work is recommended upon completion. Prime or undercoat is not needed.

8) Why F370?

· Fast flow channeling - a round base gutter for better water discharging during heavy rain.· Better performance - perfect solvent welded for all joining point. Non-leakage.· Spouthead rubber ring for thermal movements along gutter run. Leak proof.· Rear outlet - side discharging outlet for hidden down pipe.

9) Which bracket is most suitable when fascia board is not very straight?

Adjustable Bracket – can solve leveling problem and easy installation.Internal Bracket – aesthetic and clean look.External Bracket – for normal usage.

10) How much weight can be supported?

The gutter's purpose is to drain out the water, not to contain the water.

11) Why warp or disjointing?

· The main problem that cause warping is the fascia board quality; gutter brackets must be positioned at every 600mm along gutter run to fully support the systems.· Disjointing have depend on the installation technique and suggest spouthead injection for thermal movement allowed for every 8m gutter run.

12) Does uPVC gutter brittle?

No problem under the sun. 

Source: Arensi Marley

HBG Group

+6084326705

hbt@huaban.com.my

X

Right Click

No right click